Spaenaur Catalog 14 - Digital Flipping Catalog

CATALOG 14 P : 1-800-265-8772 F : 1-888-252-6380 www. .com Inch and Metric Pouce et Métrique 19 Jan 2018 Tension Loads / Tightening Torques R7 R Size Clamp Load Plain (ft. lbs.) Plated Size Clamp Load Plain (ft. lbs.) Plated (ft. lbs.) 1/4-20 (.250) 2025 8 76 in lbs. 1/4-20 (.250) 2850 12 9 5/16-18 (.3125) 3338 17 13 ft lbs. 5/16-18 (.3125) 4725 25 18 3/8-16 (.375) 4950 31 23 ft lbs. 3/8-16 (.375) 6975 44 33 7/16-14 (.4375) 6788 50 37 ft lbs. 7/16-14 (.4375) 9600 70 52 1/2-13 (.500) 9075 76 57 ft lbs. 1/2-13 (.500) 12750 106 80 9/16-12 (.5625) 11625 109 82 ft lbs. 9/16-12 (.5625) 16350 153 115 5/8-11 (.625) 14400 150 112 ft lbs. 5/8-11 (.625) 20325 212 159 3/4-10 (.750) 21300 266 200 ft lbs. 3/4-10 (.750) 30075 376 282 7/8-9 (.875) 29475 430 322 ft lbs. 7/8-9 (.875) 41550 606 454 1-8 (1.000) 38625 644 483 ft lbs. 1-8 (1.000) 54525 909 682 1 1/8-7 (1.125) 42375 794 596 ft lbs. 1 1/8-7 (1.125) 68700 1288 966 1 1/4-7 (1.250) 53775 1120 840 ft lbs. 1 1/4-7 (1.250) 87225 1817 1363 1 3/8-6 (1.375) 64125 1470 1102 ft lbs. 1 3/8-6 (1.375) 103950 2382 1787 1 1/2-6 (1.500) 78000 1950 1462 ft lbs. 1 1/2-6 (1.500) 126450 3161 2371 Size Clamp Load Plain (ft. lbs.) Plated Size Clamp Load Plain (ft. lbs.) Plated (ft. lbs.) 1/4-28 (.250) 2325 10 87 in lbs. 1/4-28 (.250) 3263 14 10 5/16-24 (.3125) 3675 19 14 ft lbs. 5/16-24 (.3125) 5113 27 20 3/8-24 (.375) 5588 35 26 ft lbs. 3/8-24 (.375) 7875 49 37 7/16-20 (.4375) 7575 55 41 ft lbs. 7/16-20 (.4375) 10650 78 58 1/2-20 (.500) 10200 85 64 ft lbs. 1/2-20 (.500) 14400 120 90 9/16-18 (.5625) 12975 122 91 ft lbs. 9/16-18 (.5625) 18300 172 129 5/8-18 (.625) 16350 170 128 ft lbs. 5/8-18 (.625) 23025 240 180 3/4-16 (.750) 23775 297 223 ft lbs. 3/4-16 (.750) 33600 420 315 7/8-14 (.875) 32475 474 355 ft lbs. 7/8-9 (.875) 45825 668 501 1-12 (1.000) 42300 705 529 ft lbs. 1-12 (1.000) 59700 995 746 1-14 (1.000) 32275 721 541 ft lbs. 1-14 (1.000) 61125 1019 764 1 1/8-12 (1.125) 47475 890 668 ft lbs. 1 1/8-12 (1.125) 77025 1444 1083 1 1/4-12 (1.250) 59550 1241 930 ft lbs. 1 1/4-12 (1.250) 96600 2012 1509 1 3/8-12 (1.375) 72975 1672 1254 ft lbs. 1 3/8-12 (1.375) 118350 2712 2034 1 1/2-12 (1.500) 87750 2194 1645 ft lbs. 1 1/2-17 (1.500) 142275 3557 2668 GRADE 5 GRADE 8 Coarse Thread Coarse Thread Fine Thread Fine Thread GRADE 5 GRADE 8 Property Class Minimum Tensile Strength Mpa Plain Plated Plain Plated Plain Plated M5 x 0.80 (54) (41) (78) (59) (91) (68) M6 x 1.00 (92) (69) (133) (99) (156) (116) M7 x 1.00 (156) (116) (222) (167) (260) (195) M8 x 1.25 (225) (169) (333) (242) (377) (284) M10 x 1.50 37 28 53 40 62 47 M12 x 1.75 65 49 93 69 108 81 M14 x 2 .00 104 78 148 111 173 130 M16 x 2 .00 161 121 230 172 269 202 M18 x 2.50 222 167 318 238 372 279 M20 x 2.50 314 235 449 337 525 394 M22 x 2.50 428 321 613 460 716 537 M24 x 3 .00 543 407 776 582 908 681 M27 x 3 .00 796 597 1139 854 1331 998 M30 x 3.50 1079 809 1543 1158 1804 1353 M33 x 3.50 1468 1101 2101 1576 2455 1842 M36 x 4 .00 1886 1415 2699 2024 3154 2366 8.8 10.9 12.9 Socket M6-M16:800 M20-M30:830 1040 1220 Nominal Size and Thread Pitch Bolt Torque Specs in Foot Pounds or (Inch Pounds) This table is based on a torque coefficient, K=0.20 for non-plated steel fasteners and K=0.15 for plated fasteners. These Figures represent an estimate of torque (torque being the measurement of friction, not tension) required to induce given preload (clamp load) in a bolt for non-critical applications only. For critical or special applications where greater control is desired this should be experimentally determined. This applies to washer faced or double chamfered hex nuts (or bolts, if bolt is torqued) having a width across flats of approximately 1.5 times the nominal diameter and having threads free of interference. Because of the many interrelated variables that directly or indirectly affect friction, such as surface texture, type of coating or finish, lubrication, speed of tightening, human error, etc., it is possible to experience as much as ±25% deviation in preload (clamp load) with the use of a torque wrench Metric Torque Table Charges de tension / Couples de serrage F : 1- 8-252-6380 service@spaenaur.c © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue.

RkJQdWJsaXNoZXIy MzMyMjI=